Loading...
Error
There was an error loading the page.
Taxonomy:
Contributors
Feedback
From users who are members of Transition to university :
Christian LawsonPerfect  said  Ready to use  4 years, 3 months ago 
Hannah Aldous  said  Needs to be tested  4 years, 3 months ago 
Elliott Fletcher  said  Has some problems  4 years, 3 months ago 
Stanislav Duris  said  Has some problems  4 years, 3 months ago 
History
Elliott Fletcher 4 years, 2 months ago
Published this.Christian LawsonPerfect 4 years, 3 months ago
Gave some feedback: Ready to use
Christian LawsonPerfect 4 years, 3 months ago
Saved a checkpoint:
This is fine. I had to add \left and \right around brackets in a couple of places so they stretch around the fractions inside.
Hannah Aldous 4 years, 3 months ago
Gave some feedback: Needs to be tested
Elliott Fletcher 4 years, 3 months ago
This is a really good question, i just have a couple of comments
Main Parts
a) and b) i would use a \displaystyle before the fractions in the questions to make the fractions look bigger.
Advice
a) in the very last calculation when you are factorising the quadratic, you write the constant term as a power of a different number like 4^3, i would just leave this as it's simplified number, e.g
x^230x4^3 = 0 could be x^230x64 = 0
b) There is a random ' after the ln on the first line here
I think you are just missing a few full stops after some equations. Specifically, the one before "We then just need to rearrange our equation" and the very last line where you give the final value of x.
Elliott Fletcher 4 years, 3 months ago
Gave some feedback: Has some problems
Hannah Aldous 4 years, 3 months ago
Gave some feedback: Needs to be tested
Hannah Aldous 4 years, 3 months ago
Gave some feedback: Has some problems
Hannah Aldous 4 years, 3 months ago
Gave some feedback: Doesn't work
Hannah Aldous 4 years, 3 months ago
Gave some feedback: Needs to be tested
Stanislav Duris 4 years, 3 months ago
Gave some feedback: Has some problems
Stanislav Duris 4 years, 3 months ago
I feel like some parts in advice need a bit more explanation:
 In part a.iv) I think you should add a bit more explanation why the answer is always 0. Something along the lines that as $b^0 = 1$ then $\log_b(1) = 0$.
 In part b) at the end, "the only value for x is..." I feel should be something along the lines of "the only possible value for x is ...".
 In part c) "Laws for logarithms can also be applied to $\ln$." maybe you could add "as $\ln(x) = \log_e(x)$."
 Also, the last two lines of the advice is only right when p = 2. The right answer in advice always takes a square root rather than the appropriate root. Fix this.
There are some small mistakes in punctuation:
 Some parts are missing a blank space between the = and the gap.
 In advice, I feel like many of the commas you used are unnecesseary, for example "We need to use the rule," is followed by that rule so I would remove the comma so it flows better. You've done this correctly in part a.iii). Maybe if you want to keep the comma there, you should put comma after the rule/equation on the separate line as well, to make it stand out from the sentence. Similarly, "Subsituting in our values for x and y gives," I would remove these commas too for the same reason.
 You're missing a few full stops when your sentences finish with an equation in advice. For example, in part a) after the last line in each part i/ii/iii or last line of the whole advice, I think there should be full stops.
 In advice part b), near the end  "to write our equation as," is followed by two lines of equations. You put full stop after the first line by mistake, but it should be at the end of the second line. Just move the \text{.} to the end of that expression.
Finally, part c) asks for the answer to be put in the form $\frac{e^{a}}{b}$, but accepts answers in different forms such as ($(\frac{e^{m}}{q})^{1/p}$ or ${e^{a}}*{b^{1}}$. I think this could be easily fixed by putting some required/forbidden strings in the string restriction for the question. I would advise trying "(e" and ")^" and "*" as forbidden strings and add "e" as a required string just to be sure. Hopefully that will fix this tiny problem.
Hannah Aldous 4 years, 4 months ago
Gave some feedback: Needs to be tested
Hannah Aldous 4 years, 4 months ago
Created this.No variables have been defined in this question.
This variable doesn't seem to be used anywhere.
Name  Type  Generated Value 

Error in variable testing condition
There's an error in the condition you specified in the Variable testing tab. Variable values can't be generated until it's fixed.
No parts have been defined in this question.
Select a part to edit.
Ask the student a question, and give any hints about how they should answer this part.
Pattern restriction
Variables
String restrictions
For each combination of answer and choice, specify the number of marks to add or subtract when the student picks it.
For each combination of answer and choice, write 1 if the student should tick it, or 0 if they should leave it unticked.
Answers  

Choices 
Test that the marking algorithm works
Check that the marking algorithm works with different sets of variables and student answers using the interface below.
Create unit tests to save expected results and to document how the algorithm should work.
There's an error which means the marking algorithm can't run:
Question variables
These variables are available within the marking algorithm.
Name  Value  

Marking parameters
These values are available as extra variables in the marking algorithm.
Name  Value 

Part settings
These values are available as entries in the settings
variable.
Name  Value 

Alternative used:
Note

Value  Feedback 


Click on a note's name to show or hide it. Only shown notes will be included when you create a unit test.
Unit tests
No unit tests have been defined. Enter an answer above, select one or more notes, and click the "Create a unit test" button.
The following tests check that the question is behaving as desired.
This test has not been run yet This test produces the expected output This test does not produce the expected output
This test is not currently producing the expected result. Fix the marking algorithm to produce the expected results detailed below or, if this test is out of date, update the test to accept the current values.
One or more notes in this test are no longer defined. If these notes are no longer needed, you should delete this test.
Name  Value 

Note  Value  Feedback  

This note produces the expected output  Current: 


Expected: 

This test has not yet been run.
When you need to change the way this part works beyond the available options, you can write JavaScript code to be executed at the times described below.
To account for errors made by the student in earlier calculations, replace question variables with answers to earlier parts.
In order to create a variable replacement, you must define at least one variable and one other part.
Variable  Answer to use  Must be answered?  

The variable replacements you've chosen will cause the following variables to be regenerated each time the student submits an answer to this part:
These variables have some random elements, which means they're not guaranteed to have the same value each time the student submits an answer. You should define new variables to store the random elements, so that they remain the same each time this part is marked.
This part can't be reached by the student.
Add a "next part" reference to this part from another part.
None of the parts which can lead to this part are reachable either.
Next part options
Define the list of parts that the student can visit after this one.
Previous parts
This part can follow on from:
This part doesn't follow on from any others.
to
Select extensions to use in this question.

There was an error loading this extension.
Define rulesets for simplification and display of mathematical expressions.
Define functions to use in JME expressions.

Parameters
 : of
Builtin constants
Custom constants
Names  Value  LaTeX  

Add styling to the question's display and write a script to run when the question is created.
This question is used in the following exams:
 Logarithms by Christian LawsonPerfect in Transition to university.
 maths practicerevision by David Martin in David's workspace.
 Joshua's copy of Printable assignment using NUMBAS by Joshua Capel in Joshua's workspace.
 franco's copy of Joshua's copy of Printable assignment using NUMBAS by franco chooramen in franco's workspace.
 Logarithms by Angus Rosenburgh in Angus's workspace.
 Huuuuuge test by Angus Rosenburgh in Angus's workspace.
 Nick's copy of Logarithms by Nick Walker in Nick's workspace.
 Logarithms [L6 Randomised] by Matthew James Sykes in CHY1205.
 NUMBAS  Logarithms by Katy Dobson in Katy's workspace.
 Blathnaid's copy of NUMBAS  Logarithms by Blathnaid Sheridan in Blathnaid's workspace.
 Initial maths test by J. Richard Snape in J. Richard's workspace.
 Rules of Logarithms by JoAnn Lyons in JoAnn's workspace.
 MATH1601 Quiz 1 by Blathnaid Sheridan in Blathnaid's workspace.
 Printable assignment using NUMBAS by Joshua Capel in Daniel's workspace.
 Foundation Maths BPortfolio 4 Logarithm by Jean jinhua Mathias in Core Foundation Maths.
 Miscellaneous by Mario Orsi in Mario's workspace.
 Maria's copy of Logarithms by Maria Aneiros in Maria's workspace.
 Logarithms by Leonardo Juliano in BiomedSkills.
 Logarithms by AJAY OTTA in AJAY's workspace.
 Algebra by Alan Levine in Mathtest Questions.
 test exam algebra by Jose Camarena Brenes in Jose's workspace.
 LogarithmsEasy by AJAY OTTA in AJAY's workspace.
 algebraQuestions by Ed Southwood in Ed's workspace.
 alge by Ed Southwood in Ed's workspace.
 Logarithm by Jinhua Mathias in Maths 3 2020.
 Logarithms by Jinhua Mathias in Maths 3 2020.
 Logarithms by Jinhua Mathias in Jinhua's workspace.
 Edina's copy of Logarithms Exam qs by Edina Kurdi in Edina's workspace.
 Week 1 revision by Sara Santos in Sara's workspace.
 first exam by Sara Santos in Sara's workspace.